14 November 2019
JCI MQB/GOLF VII KEY PROGRAMMING USING AVDI
To program a spare key for a VAG MQB/Golf VII Johnson Controls Dashboard you'll need:
- Abrites Diagnostic Interface and PROTAG Programmer:
- AVDI VN009 Special Function:
- 1x AVDI VAG CS Extraction Token:
- 1 VAG MQB key:
STEP 1. READ THE COMPONENT SECURITY BYTES
- Open the AVDI VAG Software and go to "Key learning".
- Select the option "IMMO 4/5 by component security".
- Turn the ignition on using the working key.
- Click "Read CS" (you will need internet access, 1 VAG CS Extraction Token and a valid AMS). Once the CS is calculated, it will show it on your screen.
STEP 2. MAKE THE DEALER KEY
- Click "Make dealer key".
- Put the working key into the PROTAG and then the new key to prepare the dealer key.
STEP3. PROGRAM THE NEW KEY(S)
- Turn the ignition on with the working key. Press Learn.
- Enter the number of keys that you want to program including existing keys and click "OK".
- The software will prompt you to start the ignition with each key.
- The new key(s) are now programmed into the vehicle and will start the car.
